Product overview:
Bar semi-automatic series of photovoltaic power station cleaning equipment is a professional cleaning equipment designed, researched, developed and manufactured according to the special environment of photovoltaic power stations in China. It is suitable for large cleaning equipment but can not enter the agricultural and light complementary, barren hills, ponds and other photovoltaic power station cleaning.The product is simple to operate and maintain, easy to carry, and low to use cost. Two people can clean 1.0~1.5MW photovoltaic modules every day.
Product characteristics:
1、The strip semi-automatic photovoltaic power station cleaning equipment walks with the module frame, controls the switch and remote control for many times, and implements comprehensive cleaning for the surface of photovoltaic modules.。
2、Easy to install, the top of the equipment is equipped with a push wheel, which can be pushed for installation.
3、This equipment for lithium battery, external power supply or generator, simple, convenient and flexible use.
4、In the agricultural and light complementary, barren mountain or pond photovoltaic power station, when the square array cannot run in series, it is moved to another square array by artificial lifting. Manual supervision and control of the operation of the equipment, 2 people can complete the cleaning work of 1.5 ~ 2 MWp photovoltaic power station every day.
5、Can be dry washing, according to the site situation to use the corresponding cleaning method
The Company reserves the right to change or stop the technical parameters. If the specifications in the table do not conform with the actual products, the actual products shall prevail.
parameter |
Name |
B21-2000 |
B21-3300 |
B21-4000 |
B21-4000 |
work pattern |
Manual monitoring |
||||
Electricity voltage |
24V |
||||
power supply mode |
Lithium battery power supply & generator & external power supply |
||||
driving mode |
Motor output drive |
||||
Walking way |
Many rounds of walking |
||||
brush sweeper |
PVC roller brush |
||||
control system |
Remote control |
||||
operating temperature range |
-30~60℃ |
||||
Run noise |
<35db |
||||
Cleaning method |
Dry cleaning and water washing for both purposes |
||||
running speed |
9~10m/ minute |
||||
parameter of electric machine |
150W |
300W |
460W |
500W |
|
Roll brush length |
2000mm |
3320mm |
4040mm |
4640mm |
|
Daily work efficiency |
1~1.2MWp |
1.5~2.0MWp |
1.5~2.0MWp |
1.5~2.0MWp |
|
weight |
30kg |
40kg |
50kg |
55kg |
|
dimension |
2450*540*120mm |
3820*540*120mm |
4580*540*120mm |
5000*540*120mm |
push wheel :
Play an auxiliary role in the process of handling, a person can pull away
change gear :
The hanging wheel is a role hanging on the photovoltaic panel to prevent falling
Note: If you want to use the device better. Better preventive safety measures can be taken to install the tracks on the photovoltaic panels
usage scenario:
The distribution of photovoltaic power stations in a large area is concentrated, with small gaps and no installation buckle in the middle
Applicable to: mechanized cleaning, manual cleaning
Automatic intelligent cleaning machine and semi-automatic cleaning machine have requirements for the length of photovoltaic panels, and different lengths use different sizes of equipment. One equipment can be cleaned 1-1.5 mw a day, generally large power stations and cleaning service companies use more, can be both dry and wet.